SICK MLG-2 WebChecker User Manual

Figure 25: Distances with light in the same direction
X Distance between sender and receiver
Y Minimum distance of the MLG-2
0 mm
1
00 mm
200 mm
300 mm
0.0 m 2.0 m
X
Operating range
Minimum distance
Y
Figure 26: Diagram of distances with light in the same direction
5.2.3 Minimum distance from reflective surfaces
Reflective surfaces near the light path between the sender and receiver may result in
disr
upt
ive reflections and beams being deflected and, hence, result in a failure to
detect objects.
In the case of reflective surfaces, a minimum distance must be maintained between
the reflective surface and the light beams to ensure reliable operation.
This minimum distance depends on the distance between sender and receiver.
5 MOUNTING
34
O P E R A T I N G I N S T R U C T I O N S | MLG-2 WebChecker 8025190/2020-01-13 | SICK
Subject to change without notice

SICK MLG-2 WebChecker Specifications

General

Brand	SICK
Model	MLG-2 WebChecker
Category	Measuring Instruments
Language	English