102 CLINITEK Status+ Analyzer Operator’s Guide
System Configuration
Screen 3 of 3
•Custom color 1
•Custom color 2
•Custom color 3
•Custom color 4
Note If you edit a custom color
that already exists, the system
deletes all the patient test results.
To customize a urine color, perform
the following steps:
1. Select Enter custom color 1, 2,
3, or 4 that corresponds to
Custom Color 1, 2, 3, or 4.
2. Enter a custom color name.
Note A color name can have a
maximum of 10 characters.
3. Select Enter.
The Sample Appearance-
Select colors screen 3 of 3
displays.
If a custom color exists, the
Sample Appearance alert
screen displays.
4. Select an option:
•Select Yes to edit the
custom color and delete all
the records.
•Select No to return to the
Sample Appearance
Select Colors 3 of 3
screen.
To delete a custom color, perform
the following steps:
1. Select Edit custom color 1, 2,
3, or 4 that corresponds to
Custom Color 1, 2, 3, or 4.
2. Select backspace to delete each
letter in the custom color
name.
3. Select Enter.
Urine Color Option Description
To Next Page
Loading...
