108 CLINITEK Status+ Analyzer Operator’s Guide
System Configuration
4. On the System Settings screen, perform the following steps:
a. Select the System Settings options.
System Settings Option Description
Screen 1 of 2
Printer • Automatic (default) prints
the results for each test
automatically after you
complete the test.
• Manual does not print the
test results automatically.
Select Print on the Results
screen to print the test
results. This option extends
the battery life.
• Off the test results do not
print. This option extends the
battery life. You might want
to select the Off option, when
the printer runs out of printer
paper, while you send data to
the LIS or host computer, or if
you want to reduce the noise
level in the laboratory.
To Next Page