Siemens CLINITEK Status+ User Manual

CLINITEK Status+ Analyzer Operator’s Guide 123
System Configuration
To upgrade the analyzer software, perform the following steps:
1. If the CLINITEK Status+ analyzer is on, press the on/off power
button until the analyzer powers off.
The test table retracts.
2. Prepare the analyzer:
a. Ensure the CLINITEK Status+ analyzer connects to external
power and not battery power.
b. Do not power on the analyzer.
c. Turn the analyzer so that the back of the analyzer faces you.
d. Lift the printer cover.
CAUTION
Ensure you have printed or recorded the most recent patient
results before you perform the software upgrade because the
upgrade process deletes all patient records and all patient test
results in the system. For more information about recall
results, see Section 6, File Management.
CAUTION
Do not use battery power when you upgrade the software. If
you do, the software installation might fail.
CAUTION
Do not use gloves when you insert or remove the memory
card. Using gloves can result in electrostatic damage to the
card.
Ensure you wear gloves as required by your facility to
perform other tasks.

Siemens CLINITEK Status+ Specifications

General

Display	LCD
Sample Type	Urine
Measurement Method	Reflectance photometry
Type	Urinalysis Analyzer
Test Types	Urine Chemistry
Connectivity	RS232 port
Weight	5.0 kg
Power Supply	100-240 V AC, 50-60 Hz
Data Storage	Up to 200 patient results
Test Parameters	Leukocytes, Nitrite, Urobilinogen, Protein, pH, Blood, Specific Gravity, Ketone, Bilirubin, Glucose
Test Strips	Multistix and other compatible strips