158 CLINITEK Status+ Analyzer Operator’s Guide
Symbols
Connectivity Displays only if you run a
CLINITEK Status+ analyzer with a
CLINITEK Status connector.
Indicates that the CLINITEK Status+
analyzer is connected to the
CLINITEK Status connector,
Connectivity is enabled, and the
system is connected to the LIS.
No Connectivity Displays only if you run a
CLINITEK Status+ analyzer with a
CLINITEK Status connector.
Indicates that the CLINITEK Status
system is not connected to the
wired (Ethernet) or wireless
connection between the analyzer
and the server on a remote
computer.
Symbol Name Description
To Next Page
Loading...
