164 CLINITEK Status+ Analyzer Operator’s Guide
Glossary
ready The state when the analyzer is available to
perform tests.
recall To access data such as test results stored on
the analyzer.
restore To restore the analyzer setup to the default
settings.
required entry A data entry box that must have data
entered into it.
sample interference
notes
Informs the user when appropriate about
test results that can be affected by
components detected in the same urine
sample.
screen The display area that contains the controls
the operator selects when operating the
analyzer. The analyzer software UI contains
screens, prompts, messages, and other
operating information.
screen title A text label that typically displays in the
upper left corner of a screen which serves as
a label for that screen.
Select Ready screen The software UI screen that displays when
the system completes the startup process.
All software UI navigation begins from the
Select Ready screen.
settings The areas of the software user interface
where you can configure the analyzer.
Settings screen A software UI screen which enables the
operator to adjust or configure some aspect
of the analyzer.
SI units An abbreviation for Systéme International, a
unit of measure.
software Computer instructions that generate and
carry out commands to control the system
operation.
Term Definition
To Next Page
Loading...
Need help?
General
