Siemens FS720 - Selecting Type and Entering MAC Address

Commissioning security module (firewall) FN2009
-
A1
Selecting type and e
ntering MAC address
18
100 | 178
Building Technologies
A6V10210416_j_en_
--
Fire Safety
2018
-
08
-
29
18.2 Selecting type and entering MAC address
The corresponding MAC address can be found on the front of the FN2009
-
A1.
The FN2009-A1 is type S612V2.
Preparation
w The PC is connected to FN2009-A1.
w 'Security Configuration Tool' is started.
1. Create a new project using the 'Project' > 'New' menu and enter the
administrative project data, 'User name' and 'Password'.
2. Save the new project.
3. Select 'View' > 'Advanced Mode'.
a More entry masks for required settings can be viewed.
Selecting type
1. Highlight the field below the 'Type' designation.
a The button for the dropdown list field is displayed.
2. Select 'S612V2'.
a Type is selected.
Entering MAC address
w The MAC address is known.
1. Double-click on the field below the 'MAC Address' designation.
a The MAC address can be edited.
2. Enter the MAC address for the FN2009-A1.
a MAC address is entered.