Siemens FS720 - Setting Detector Parameter Sets

A
-
Commissioning standalone
'Station' without PC
Setting detector parameter sets
6
40 | 178
Building Technologies
A6V10210416_j_en_
--
Fire Safety
2018
-
08
-
29
6.3 Setting detector parameter sets
1. Select 'Topology' > ↑ 'Detection tree' > ↑ 'Area' > ↑ 'Section' > ↑ 'Zone' >
'Detect.' in the main menu.
2. Press the 'More Options' ↑ softkey.
3. Select 'Execute commands'.
4. Select the corresponding command:
– 'Select PS MANNED'
– 'Select PS UNMANNED'
– 'Select PS'
5. Select the desired ↑ parameter set.
a The following message is displayed: 'Command executed'