Siemens FS720 - Installing Security Configuration Tool

Commissioning security module (firewall) FN2009
-
A1
Installing Security Configuration Tool
18
99 |
178
Building Technologies
A6V10210416_j_en_
--
Fire Safety
2018
-
08
-
29
18.1 Installing Security Configuration Tool
The 'Security Configuration Tool' software is included in the scope of supply for
the FN2009-A1.
l Install the 'Security Configuration Tool' software.
a The software is installed in the standard path 'SIMATIC' > 'SCALANCE' >
'Security' > 'Security Configuration Tool'.
a FN2009-A1 can be configured.
The FN2009
-
A1 is displayed as S612V2 in the Security Configuration Tool.