Siemens FS720 - Floor Repeater Display FT2011

Updating the f
irmware
Updating the FW of the peripheral devices
22
134 | 178
Building Technologies
A6V10210416_j_en_
--
Fire Safety
2018
-
08
-
29
22.8.3 Floor repeater display FT2011
WARNING
Incorrect assignment between detector/detector zone and
customer text
Misleading messages in the event of an alarm
●
Never change the wiring during the firmware update.
The firmware must be updated individually for each ↑ floor repeater display.
Preparation
w The floor repeater display is fed by a 24 V external power supply or by the C-
NET detector line.
w The driver for the MCL-USB adapter FDUZ221 or FDUZ227 is installed on the
PC.
1. Select 'File' > 'Import new resource package'.
2. In the selection window, open an F-FXS7211-XX_x_x...zip file that matches the
↑ 'Site'.
3. Open the device and connect the PC via the MCL-USB adapter to the device.
Figure 5: Connect the PC to the floor repeater display
FDUZ221 /
FDUZ227
MCL-USB adapter (interface USB/MC-LINK)
X100 Connection for the MCL-USB adapter
FT2011 Floor repeater display
24 V
FT2011
X100
MC-Link
FDUZ221/FDUZ227
USB