Siemens FS720 - Creating Firewall Rules

Commissioning security module (firewall) FN2009
-
A1
Creating
firewall rules
18
106 | 178
Building Technologies
A6V10210416_j_en_
--
Fire Safety
2018
-
08
-
29
18.5 Creating firewall rules
w IP service definitions are created.
w The network addresses are known.
1. Right-click on the module for which you want to create firewall rules.
2. Select 'Properties…'.
a The 'Module Properties' window for the selected module is displayed.
3. Select the 'Firewall Settings' tab.
a The following window is displayed without entries:
4. Click on 'Add Rule' for each firewall rule you would like to create.
5. Select the corresponding settings and IP services from the dropdown list fields.