Updating the FW of the peripheral devic
22
137 |
Building Technologies
Updating the firmware
Check the COM port setting under '
before performing the firmware update.
1. Select 'Update' > 'Periphery update wizard'.
2. In the 'Password check' window, enter the password '12345678' and click on
the 'Next' button.
3. Select the 'Standard C-NET device' element in the 'Devices:' field.
a The connection with the mimic display driver is established.
a The latest firmware package and the latest firmware version are suggested.
4. Click on 'Next'.
5. Follow the instructions in the dialog and perform the update.
a The mimic display driver restarts.
6. Remove the MCL-USB adapter.
a The firmware is updated.
To Next Page
Loading...
