Siemens FS720 - Page 15

About this document
Revision history
1
15 |
178
Building Technologies
A6V10210416_j_en_
--
Fire Safety
2018
-
08
-
29
Version Edition date Brief description
g 2013-11-14 Edition for IP5
Change to date format according to ISO 8601
New:
Standard gateway pre-configured for standalone stations
Revised:
Firmware update updated
Replacing a device without Cerberus-Engineering-Tool
CPR replaces CPD: The Construction Products Regulation (CPR 305/2011)
replaces the previous Construction Products Directive (CPD 89/106).
Chapters 'Removing or replacing non-stationary devices' and 'Changing and
expanding the detector line' have been combined into one new chapter called
'Changing and expanding the FDnet/C-NET detector line'
Chapters 'B1 - Commissioning standalone 'Station' with PC, without pre-
configuration' and 'B2 - Commissioning standalone 'Station' with PC, with pre-
configuration': Only applicable to C-NET detector lines
'Definition of terms' chapter revised
f 01.2013 Chapter 'Setting Windows firewall' updated for Windows 7
e 05.2012 Edition for IP4
New:
Updating the firmware of the main CPU and additional CPUs in a single step
Addition to chapter 'Setting Windows firewall', for Windows 7
Updating several networked 'Stations' simultaneously
Update the firmware of the additional CPUs via GAP
Creating a backup of the 'Site' configuration
Replacing C-NET device: 20 s wait time instead of 40 s
Updating the firmware of the peripheral devices: Resetting the line card no longer
necessary
Updating the FDCW241
FDCW221 removed
Commissioning of I/O card (remote transmission) FCI2007-A1 and I/O card
(horn/monitored) FCI2009-A1
Revised:
Creating diagnosis report
Restart the station
Checking 'Site' function
Restoring factory settings
Checking the detector line
d 07.2010 Edition for MP3.0 XS:
Revision history redefined and standardized
Ethernet switch (MM) FN2008-A1 and safety module (firewall) FN2009-A1 added
"Merging two sites" chapter added
Chapter on 'Site' conversion removed. Reference to doc. A6V10244961 'Site
conversion' added.
Revised chapters: "Updating the firmware of the 'Station'", "Restarting 'Station'",
"Restoring 'Station' to factory setting", "Loading configuration from the PC to the
'Station'"
Chapter structure changed
c 08.2009 Modifications for MP1XS