Restoring factory setting on the 'Station'
24
164 | 178
PMI & mainboard FCM2027
1. NOTICE! Configuration will be deleted! Save the configuration data for the
↑ 'Station' before restoring the factory setting.
2. WARNING! It is impossible to acquire and process alarms or faults without a
site configuration! Keep the 'S32' button on the rear of the operating unit
pressed and simultaneously press <Reset> on the ↑ Person Machine Interface
until the 'Station' restarts (>2 s).
a The Station restarts.
3. Enter the date and time. To do this, select the 'Settings/administration' >
'System commands' > 'Set system time' menu items.
To Next Page
Loading...
