Siemens SIMOCODE pro - Simple Network Management Protocol (SNMP)

Communication
2.4 EtherNet/IP communication
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
123
2.4.15
Simple Network Management Protocol (SNMP)
SNMP is a network protocol for monitoring and controlling network elements (e.g. switches).
SIMOCODE pro V EIP supports the Ethernet service SNMP. MIB-2 (RFC1213) is supported.
R/W objects can be changed with SNMP tools and are stored in the basic unit.
After replacement with a new basic unit from the factory or a basic unit that has undergone a
general reset, the R/W objects will be in the factory settings.