Siemens SIMOCODE pro - Tables, PROFIBUS Data Records; PROFIBUS Tables; Abbreviations and Specifications

Tables, data records
3.3 Tables, PROFIBUS data records
SIMOCODE pro - Communication
142 Function Manual, 11/2018, A5E40508495002A/RS-AC/003
3.3
Tables, PROFIBUS data records
3.3.1
PROFIBUS tables
3.3.1.1
Abbreviations and specifications
Abbreviations
See SIMOCODE pro – System Manual
(https://support.industry.siemens.com/cs/ww/en/view/109743957).
Specifications
The following specifications apply in the tables:
Table 3- 18 Table specifications (example)
Designation
Type
Range
Unit
Information
Reserved
Byte[4] *
)
Cos phi
Byte
0 ... 100
1 %
BU2
Reserved
Byte[5] *
)
Max. current I_max Word 0 ... 65535 1 % / I
s
BU0, BU1, BU2 **
)
*) Items in italics are not relevant (reserved) and must be filled with "0" when written to.
**) Entry relevant for basic unit 1 and basic unit 2
Parameters that can be changed during operation
Event - PRM error number (bytes):
If parameterization is not possible, the number of the parameter group (PRM group) that
caused the error is communicated here.
Figure 3-1 Example for parameter group