Siemens SIMOCODE pro - Data Transfer

Communication
2.2 PROFINET communication
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
45
2.2.3
Data transfer
Options for data transfer
The following figure shows an overview of the communication functions supported by
SIMOCODE, which are described in the following sections:
Figure 2-10 Communication functions as exemplified by SIMOCODE pro V PN (GP)
1 Communication between PLC (IO controller) and SIMOCODE pro (IO device) via
PROFINET / Ethernet
2 Communication between PC with parameterization software SIMOCODE ES and
SIMOCODE pro via PROFINET
3 Communication between PC with parameterization software SIMOCODE ES Premium and
SIMOCODE pro via SIMATIC S7 (SIMOCODE pro integrated into SIMOCODE ES
(TIA-Portal))
4 Communication between PC parameterization software SIMOCODE and SIMOCODE pro
via the SIMOCODE pro system interface (point-to-point via RS 232 or USB)
5 Communication between PC or HMI with OPC UA Client and SIMOCODE pro via
Ethernet/OPC UA
6 Communication between PC with a web browser and SIMOCODE pro via TCP/IP and
HTTP