Siemens SIMOCODE pro Function Manual

Tables, data records
3.6 EtherNet/IP data tables
SIMOCODE pro - Communication
316 Function Manual, 11/2018, A5E40508495002A/RS-AC/003
3.6.3
Message Router object
The Message Router object is defined by CIP. It does not possess any class or instance
attributes, but simply transfers explicit messages to the relevant objects.
3.6.4
Assembly object
The following information applies to the Assembly object of the SIMOCODE pro V
EtherNet/IP device:
● Class code: 0x04
● Class attributes: 1, 2, 3
● Number of instances: 13.
Instance 2: Output assembly basic overload from ODVA Profile
The tables below describe in each case the format of attribute 3 of the relevant assembly
instance.
Byte
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
0
Reserved
Reserved
Reserved
Reserved
Reserved
Fault Reset
Reserved
Reserved
Instance 50: Input assembly basic overload from ODVA Profile
The table below describes the format of attribute 3:
Byte
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
0
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Faulted / Trip
Instance 51: Input assembly extended overload from ODVA Profile
The table below describes the format of attribute 3:
Byte
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
0
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Warning
Faulted / Trip

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000