Siemens SIMOCODE pro - MMRevDhl motor block

Tables, data records
3.3 Tables, PROFIBUS data records
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
197
3.3.2.17
Data record 139 - Marking
For external faults, limit monitors, and monitoring functions of the temperature and analog
modules, user-specific texts can be configured for marking. The diagnostics
●
External fault 1 to 6
(status information, warnings, and faults)
●
Limit 1 to 4
(status information)
●
TM
warning T> / tripping T>
(status information, warnings, and faults)
●
AM Warning / tripping 0/4-20mA<>
(status information, warnings, and faults)
can be parameterized to have various meanings, e.g. fill level >, bearing hot, etc. To simplify
diagnostics, these texts can be saved in the device. These can be created, read out and
displayed, for example, with
SIMOCODE ES
. The texts do not contain any functions.
You can access the following texts via data record 139:
Table 3- 39 Data record 139 - Marking
Byte.Bit
Designation
Type
Information
0.0
Reserved
Byte[4]
4.0
Reserved
Byte[6]
10.0
Marking - External fault 1
Byte[10]
BU0 BU1 BU2(+)
20.0 Marking - External fault 2 Byte[10] BU0 BU1 BU2(+)
30.0
Marking - External fault 3
Byte[10]
BU0 BU1 BU2(+)
40.0
Marking - External fault 4
Byte[10]
BU0 BU1 BU2(+)
50.0
Marking - External fault 5
Byte[10]
BU2(+)
60.0
Marking - External fault 6
Byte[10]
BU2(+)
70.0
Reserved
Byte[10]
80.0
Reserved
Byte[10]
90.0
Marking limit 1
Byte[10]
BU2(+)
100.0
Marking limit 2
Byte[10]
BU2(+)
110.0
Marking limit 3
Byte[10]
BU2(+)
120.0
Marking limit 4
Byte[10]
BU2(+)
130.0
Marking - TM warning T>
Byte[10]
BU0 BU2(+)
140.0
Marking - TM trip T>
Byte[10]
BU0 BU2(+)
150.0
Marking warning 0/4-20mA>
Byte[10]
BU2(+)
160.0
Marking - Warning 0/4-20 mA<
Byte[10]
BU2(+)
170.0
Marking - Trip 0/4-20 mA>
Byte[10]
BU2(+)
180.0
Marking - Trip 0/4-20 mA<
Byte[10]
BU2(+)
190.0
Reserved
Byte[10]