Siemens SIMOCODE pro - I&M2 - Installation Date; I&M3 - Comment

Tables, data records
3.5 Modbus data tables
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
293
3.5.2.11
I&M2 - Installation date
Read access to the I&M2 data is possible via function codes 03 and 04. Write access is
possible via function codes 06 and 16.
Max. data length per access: 13 registers.
Table 3- 82 I&M2 - Installation date
Input/holding register
Content
Size
Access
1)
Address
0x4040 Reserved 10 byte r
0x4045
Date
16 byte
r/w
1) Access to the installation date via Modbus: read/write
3.5.2.12
I&M3 - Comment
Read access to the I&M3 data is possible via function codes 03 and 04. Write access is
possible via function codes 06 and 16.
Max. data length per access: 32 registers.
Table 3- 83 I&M3 - Comment
Input/holding register
Content
Size
Access
1)
Address
0x4060
Reserved
10 byte
r
0x4065 ... 0x407F Comments 54 byte r/w
1) Access to the comment via Modbus: read/write