Siemens SIMOCODE pro Function Manual

Communication
2.1 PROFIBUS communication
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
29
2.1.5.3
Integration of SIMOCODE pro as a DPV1 slave via GSD in the configuring software
SIMOCODE pro is integrated into your system as a standard slave via the GSD file.
You can download the GSD file from GSD file (https://www.siemens.com/profibus-gsd)
(switching devices).
The following GSD files are available for SIMOCODE pro C:
● SI0180FD.GSG (German)
● SI0180FD.GSE (English).
● SI0180FD.GSF (French).
The following GSD files are available for SIMOCODE pro S:
● SI0181A7.GSG (German)
● SI0181A7.GSE (English)
● SI0181A7.GSF (French).
The following GSD files are available for SIMOCODE pro V:
● SI1180FD.GSG (German)
● SI1180FD.GSE (English)
● SI1180FD.GSF (French).
Note
If you want to utilize the complete functionality of SIMOCODE
pro (e.g. time stamping), your
configuration tool must support G
SD files - Rev. 5 such as STEP7 V5.3 and higher.

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English