Siemens SIMOCODE pro Function Manual

Communication
2.2 PROFINET communication
SIMOCODE pro - Communication
82 Function Manual, 11/2018, A5E40508495002A/RS-AC/003
To summarize, OPC-UA offers the following features:
● Use of open and non-platform-specific protocols for network communication.
● Internet access and communication through firewalls.
● Integrated access control and security mechanisms at the protocol and application level.
Figure 2-23 Block diagram of OPC-UA
Configuring the SIMOCODE pro V PN OPC UA server - Requirements
Activating the OPC UA server
In the default setting, the OPC UA server is
not
active. For activation, the parameter
"PROFINET Parameters → OPC UA Server Activated" must be set.
Note
Restarting the communication interface
Each change to the "Activate
OPC UA server" parameter requires that the communication
interface be restarted.
A new start of the communication interface interrupts all Ethernet and PROFINET links and
ree
stablishes them afterward.
Note
Firmware version of SIMOCODE pro V PN basic unit
OPC UA is supported by SIMOCODE
pro V PN from firmware version V1.2.2, product
version
*E07*.

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English