Figure 5-35 I/O area
The value specified by the S7 is present in the I/O area.
Note
To prevent misunderstandings, the display format should be identical with that of the S7.
Step 3: Check the value at the inputs of the FB block
The "AddOn" MCC source file or the "AddOnMCC" MCC program calls the
"FB_TargetsPLCToAddOn" function block and accesses the array in the I/O area for which it
was parameterized.
Figure 5-36 Array assignment
Configuration
5.17 Communication tests for the STS application project
SC integrated STS, GSU
142 Operating Instructions, 07/2019, A5E48271265B AA
To Next Page
Loading...