The specified offset value is displayed on CeComm "PLC-Interface 2 [5]" in the SIMOCRANE
CeCOMM diagnostic program.
6.14 Bay scanner
6.14.1 Using a bay scanner
The information contained in this chapter relating to use of a bay scanner refers exclusively to
STS crane applications.
In principle, a bay scanner can be used on GSU cranes, but a description of this application is
not included in this documentation.
Sway Control function description
6.14 Bay scanner
SC integrated STS, GSU
204 Operating Instructions, 07/2019, A5E48271265B AA
To Next Page
Loading...