Siemens SIMOTION D4x5-2 DP/PN

Preface
Introduction
The document describes the electronic sway control system SIMOCRANE SC integrated STS,
GSU Version 3.0 and the application solutions "Sway Control" and "TLS Control" for cranes.
The description is based on SIMOCRANE Basic Technology.
Target group
The target readership for this document includes commissioning engineers, programmers,
users, and service and maintenance personnel.
Benefits
This manual provides the information, procedures, and operator actions required for
commissioning and use.
Prerequisite (scope of validity)
This manual is valid for use with the following product versions:
Hardware
● SIMOTION D4x5-2 DP/PN: Firmware V5.2 SP1 (V5.02.01.00) or higher
● SINAMICS: Firmware V5.1 HF1 (V5.10.23.2) or higher
● SIMOCRANE (optional): CenSOR V2.0 HF3 (V2.0.0.3)
Software
● SIMOCRANE Basic Technology Version V3.0
● SIMOTION SCOUT version V5.2 SP1 or higher
● Option package CFC V9.0 or Drive Control Chart (DCC) V3.1 SP1 (both part of the SCOUT
installation package)
● SIMOCRANE CeCOMM diagnostic program version V4.4.2.0 or higher
● SIMOCRANE SC integrated STS, GSU V3.0
● Microsoft Windows 7 or 10
● SIMATIC Manager V5.6 or higher
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA 3