See also
FAQ_Lock bit (
https://support.industry.siemens.com/cs/ww/en/view/109476225)
A.3 List of abbreviations
The following abbreviations are used in this document:
Abbreviation Designation Meaning
OM Operating mode Operating mode (see OM)
BT Basic Technology SIMOCRANE Basic Technology software package
cgr Centigrade One-hundredth of a degree; unit of measurement used with the slewing
gear
CF card CompactFlash card Memory card for non-volatile storage of the drive software and parameters
CMS Crane Management System
COP Crane Operator Panel
CW Clockwise
CCW Counterclockwise
DCC Drive Control Chart
DN Down
DS Tandem spreader
FW Forward
GSU Grab Ship Unloader
HO Hoist
IO Input/Output variables
LAM Load suspension device
LS Landside
LS Limit switch
LH Left-hand
MAN Manual mode
MCC Motion Control Chart
OM Operating mode
PD Pendulum
PCS Prelimit switch
POS Positioning mode
PZD Process data
RH Right-hand
RMG Rail-Mounted Gantry Crane
RT Runtime
SAM Semi-automatic mode
SC Sway control Sway control system
SND Sway neutralization drive po‐
sition
Sway neutralization drive position mode
SNL Sway neutralization load posi‐
tion
Sway neutralization load position mode
Appendix
A.3 List of abbreviations
SC integrated STS, GSU
436 Operating Instructions, 07/2019, A5E48271265B AA
To Next Page
Loading...