Siemens Sinumerik 840D Series Function Manual

10.03
4.15 Parameters table
4-174
 Siemens AG, 2003. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital, HLA Module (FBHLA) - 10.03 Edition
MD no. Name in NC
ware- Version
Max. Unit
Attribute
Firm-
Data type
Index Active
Version Min.Name in plaintext
UNS.WORD
5735 5790 5797 5798
WORD UNS.WORD UNS.WORD UNS.WORD
5799
Firmware date Measuring circuit type of measuring system Processor capacity utilization Data version Firmware version
4.14 4.14 4.14 4.14 4.14
immediately immediately immediately immediately immediately
- -
%
- -
FFFF
32767
FFFF FFFF
FFFFFF
0 0 0 0 0
0
-1
0 0 0
FIRMWARE_DATE ENC_TYPE PROCESSOR_UTILIZATION PBL_VERSION FIRMWARE_VERSION
1.01 1.01 1.01 1.01 1.01
5740
FLOATActual position in relation to machine zero 4.14immediatelymm10000000.00.0 -10000000.0ACTUAL_POSITION 1.01
5741
FLOATPiston position in relation to piston zero 4.14immediatelymm10000000.00.0 -10000000.0ACTUAL_PISTON_POSITION 1.01
Sec- tion
4 Firmware Drive Functions

Siemens Sinumerik 840D Series Specifications

General

Axes	Up to 31 axes
Power Supply	24 V DC
Control Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
PLC	Integrated PLC (programmable logic controller)
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Max. Number of Channels	Up to 10 channels