Siemens Sinumerik 840D Series Function Manual

10.03
D.1 Electrical applications
D-262
 Siemens AG, 2003. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital, HLA Module (FBHLA) - 10.03 Edition
User Documentation
SINUMERIK 840D/810D (09.99 Edition)
Short Guide AutoTurn Operation
Order No.: 6FC5298-4AA30-0BP2
SINUMERIK 840D/810D (02.02 Edition)
Operator’s Guide AutoTurn Graphic Programming System
Programming/Setup
Order No.: 6FC5298-4AA40-0BP3
SINUMERIK 840D/810D (10.00 Edition)
Operator’s Guide MMC
Order No.: 6FC5298-6AA00-0BP0
SINUMERIK 840D/840Di/810D (11.02 Edition)
Operator’s Guide HMI Advanced
Order No.: 6FC5298-6AF00-0BP2
SINUMERIK 840D/840Di/810D (11.02 Edition)
Operator’s Guide HT 6
Order No.: 6FC5298-0AD60-0BP2
SINUMERIK 840D/840Di/810D (02.01 Edition)
Short Guide Operation
Order No.: 6FC5298-6AA10-0BP0
SINUMERIK 840D/810D (08.02 Edition)
Operation/Programming ManualTurn
Order No.: 6FC5298-6AD00-0BP0
SINUMERIK 840D/840Di/810D (11.02 Edition)
Operation/Programming ShopMill
Order No.: 6FC5298-6AD10-0BP1
SINUMERIK 840D/810D (06.03 Edition)
Operation/Programming ShopTurn
Order No.: 6FC5298-6AD50-0BP2
SINUMERIK 840D/810D (11.02 Edition)
Operator’s Guide HMI Embedded
Order No.: 6FC5298-6AC00-0BP2
/AUK/
/AUP/
/BA/
/BAD/
/BAH/
/BAK/
/BAM/
/BAS/
/BAT/
/BEM/
D References

Siemens Sinumerik 840D Series Specifications

General

Axes	Up to 31 axes
Power Supply	24 V DC
Control Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
PLC	Integrated PLC (programmable logic controller)
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Max. Number of Channels	Up to 10 channels