Siemens Sinumerik 840D Series Function Manual

10.03
E-278
 Siemens AG, 2003. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital, HLA Module (FBHLA) - 10.03 Edition
Appendix C to EC Declaration of Conformity No. E002 V 25/02/99
C: Conformity of the products with Council Directive 89/336/EEC has been verified
by inspection and testing in accordance with the following product standard, basic technical
specifications and the basic standards contained therein. Product categories SINUMERIK,
SIROTEC, SIMODRIVE and SIMATIC are subject to the requirements of
different standards.
C1 Product categories SINUMERIK*
)
, SIMATIC, SIROTEC:
Basic specification: EN 50081-2 dated 8/93 1)
Basic standards: Test topic:
EN 55011 2) Radio interference
Basic specification:
EN 50082-2 dated 3/95 3)
Basic standards:
Test topic:
EN 61000-4-3 4) High-frequency irradiation (amplitude-modulated)
ENV 50204 5) High-frequency irradiation (pulse-modulated)
EN 61000-4-6 6) Conducted HF disturbance
EN 61000-4-8 7) Magnetic fields
EN 61000-4-2 8) Static discharge
EN 61000-4-4 9) Fast transients (burst)
*
)
except for SINUMERIK 810D
C2 Product categories SIMODRIVE, SINUMERIK 810D:
Product standard: EN 61800-3 10)
C3 Other standards complied with:
1) VDE 0839 part 81-2 6) IEC 801-6,
VDE 0847 part 4-6
IEV 1000-4-6
ENV 50141
2) VDE 0875 part 11 7) VDE 0847 part 4-8
IEC 1000-4-8
3) VDE 0839 part 82-2 8) VDE 0847 part 4-2
EN 60801 part 2
IEC 801-2
VDE 0843 part 2
4) VDE 0847 part 4-3 9) VDE 0843 part 4
ENV 50140 VDE 0847 part 4-4
IEC 801-4
5) VDE 0847 part 204 10) VDE 0160 part 100
J
E EC Declaration of Conformity
02.99

Siemens Sinumerik 840D Series Specifications

General

Axes	Up to 31 axes
Power Supply	24 V DC
Control Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
PLC	Integrated PLC (programmable logic controller)
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Max. Number of Channels	Up to 10 channels