Siemens SIPROTEC 7SJ62 Instruction Manual

Configuration
5-14 7SJ62 Manual
C53000-G1140-C121-1
The information contains various properties depending on the information type, which
are partially fixed and may be partially influenced.
Source The source indicates the origin of the information which the device receives for further
processing. Possible sources are:
Destination The destination indicates to which interface the information is forwarded. Possible
destinations are:
For additional information please refer to appendix A.7.
5.2.3 Establishing Information Properties
General Different types of information contain different types of properties. To view the proper-
ties associated with a specific information unit (indication, command, etc.), the user
should position the mouse on the specific row associated with that ,QIRUPDWLRQ
unit, and then use the
right mouse button to access a menu where 3URSHUWLHV can
be selected.
For example, if the cursor is positioned on a specific output indication, the
right mouse
button is pressed, and the menu item 3URSHUWLHV is selected, then a choice of
whether the indication should appear in the oscillographic fault record (Figures 5-11,
− MV
Measured Value
− MVU
Measured Value, User Defined
− MVT
Measured Value with time
− LV
Limit Value
− LVU
Limit Value, User Defined
• Metered Values:
− MVMV
Metered Value of Measured Values
− PMV
Pulse Metered Value
− BI
Binary input
− F
Function key, which may serve to introduce a control action
− CFC
CFC, i.e., message comes from user-definable logic
− BO
Binary output
− LED
LED display on the device front panel
− Buffer E
Event buffer in the device
− Buffer S
Sensitive Ground fault buffer in the device (if present)
− Buffer T
Trip Log buffer in the device
− S
SCADA interface
− C
CFC, information is processed by CFC program of the user-defin-
able logic
− Di C
Control display, if information is to be displayed in the control dis-
play of the device
− Di D
Default display, if information is to be displayed in the default dis-
play of the device
− CM
Control of switching devices, if a switching object should be con-
trolled from control display/menue of the device
www . ElectricalPartManuals . com

Siemens SIPROTEC 7SJ62 Specifications

General

Brand	Siemens
Model	SIPROTEC 7SJ62
Category	Relays
Language	English