Siemens SIPROTEC 7SJ62 Instruction Manual

Appendix
A-68 7SJ62 Manual
C53000-G1140-C121-1
– CF_D4 Double Point Indication (Breaker indication
“00” = not valid/transmitted as “3”)
Control ––XX–X–XXX
– DP Feedback X –X– –X–XXX
– CF_D4 Double Point Indication (Breaker indication
“00” = intermediate/transmitted as “0”)
Control ––XX–X–XXX
– DP_I Feedback X –X––X–XXX
– CF_D4 Transformer Tap Changer Control ––XX–X–XXX
– TxTap Feedback ––––––––––
Double Controls 1 Trip 2 Close
– CF_D12 Single Point Indication ON/OFF Control ––XX–X–XXX
– SP Feedback X –XXXX–XXX
– CF_D12 Single Point Indication Open/Close Control ––XX–X–XXX
– SP Feedback X –XXXX–XXX
– CF_D12 Double Point Indication (Breaker indication
“00” = not valid/transmitted as “3”)
Control ––XX–X–XXX
– DP Feedback X –X– –X–XXX
– CF_D12 Double Point Indication (Breaker indication
“00” = intermediate/transmitted as “0”)
Control ––XX–X–XXX
– DP_I Feedback X –X––X–XXX
– CF_D12 Transformer Tap Changer Control ––XX–X–XXX
– TxTap Feedback ––––––––––
Double Controls 1 Trip 1 Close negated
– CF_D2N Single Point Indication ON/OFF Control ––XX–X–XXX
– SP Feedback X –XXXX–XXX
– CF_D2N Single Point Indication Open/Close Control ––XX–X–XXX
– SP Feedback X –XXXX–XXX
– CF_D2N Double Point Indication (Breaker indication
“00” = not valid/transmitted as “3”)
Control ––XX–X–XXX
– DP Feedback X –X– –X–XXX
– CF_D2N Double Point Indication (Breaker indication
“00” = intermediate/transmitted as “0”)
Control ––XX–X–XXX
– DP_I Feedback X –X––X–XXX
– CF_D2N Transformer Tap Changer Control ––XX–X–XXX
– TxTap Feedback ––––––––––
• Measured Values:
– MV Measured Value –––––XX–––
– MVU Measured Value, User Defined ––X–––X–––
– LV Limit Value –––––XX–––
– LVU Limit Value, User Defined –––––XX–––
• Metered Values:
– MVMV Metered Value of Measured Values ––––––––––
– PMV Pulse Metered Values X –––––––––
Type of Information Source Destination CFC Task level
Binary Inputs Function Keys CFC Binary Outputs LED CFC Measurement PLC1 (slow) PLC (fast) Interlocking
www . ElectricalPartManuals . com

Siemens SIPROTEC 7SJ62 Specifications

General

Brand	Siemens
Model	SIPROTEC 7SJ62
Category	Relays
Language	English