Configuration in STEP 7
5.7 Configuring TIM modules
TIM DNP3
134 System Manual, 06/2014, C79000-G8976-C253-03
Figure 5-30 "NTP" tab
●
You specify the synchronization cycle using the drop-down list.
●
Here, select the offset of your local time zone to Greenwich Mean Time.
●
– If the option is disabled, NTP without authentication is used.
– If the option is enabled, the secure method NTP (secure) is used.
NTP (secure) uses authentication with symmetrical keys according to the hash
algorithms MD5 or SHA-1.
You then make the settings for the parameters of the NTP servers.
To Next Page
Loading...
