Siemens TIM 4R-IE DNP3 - Cpus for Installing the TIM 4 R-IE DNP3 in an S7-300

Uses and properties of the TIM
1.12 Requirements for operation - necessary components and services
TIM DNP3
34 System Manual, 06/2014, C79000-G8976-C253-03
Compact CPU modules
CPU 312C
ab 6ES7 312-5BE03-0AB0
CPU 313C
ab 6ES7 313-5BF03-0AB0
CPU 313C-2 PtP
ab 6ES7 313-6BF03-0AB0
CPU 313C-2DP
ab 6ES7 313-6CF03-0AB0
CPU 314C-2 PtP
ab 6ES7 314-6BG03-0AB0
CPU 314C-2 DP
ab 6ES7 314-6CG03-0AB0
Instead of an S7-300 standard or compact CPU, one of the following C7 control systems can
also be used.
C7 control systems
SIPLUS C7-613
ab 6ES7 613-1CA02-4AE3
SIPLUS C7-635 KEY
ab 6ES7 635-2EC02-4AE3
1.12.2.3
CPUs for a standalone TIM 4R-IE DNP3 with S7-400 or S7-400H
Compatible CPU types for a standalone TIM 4R-IE DNP3
In standalone mode, in other words, without an S7-300-CPU, the TIM 4R-IE DNP3 is ideally
suited as a communications processor for an S7-400 or S7-400H. They are then linked over
one of the Ethernet ports of the TIM.
With an S7-400 or S7-400H, an Ethernet CP is used as the interface. The following S7-400-
CPUs can be linked over an Ethernet CP:
S7-400
CPU 412-1
ab 6ES7 412-1XJ05-0AB0
(Version 02)
CPU 412-2
ab 6ES7 412-2XJ05-0AB0
(Version 01)
CPU 412
-2 PN/DP
ab 6ES7 412
-2EK06-0AB0
(Version 01)
CPU 414-2
ab 6ES7 414-2XK05-0AB0
(Version 01)
CPU 414-3
ab 6ES7 414-3XM05-0AB0
(Version 01)
CPU 414-3 PN/DP
ab 6ES7 414-3EM06-0AB0
(Version 01)
CPU 414F-3 PN/DP
ab 6ES7 414-3FM06-0AB0
(Version 01)
CPU 416
-2
ab 6ES7 416
-2XN05-0AB0
(Version 01)
CPU 416-3
ab 6ES7 416-3XR05-0AB0
(Version 01)
CPU 416-3 PN/DP
ab 6ES7 416-3ES06-0AB0
(Version 01)
CPU 416F-2
ab 6ES7 416-2FN05-0AB0
(Version 01)
CPU 416F-3 PN/DP
ab 6ES7 416-3FS06-0AB0
(Version 01)
CPU 417-4
ab 6ES7 417-4XT05-0AB0
(Version 01)