Siemens TIM 4R-IE DNP3 - Compatible SIMATIC Cpus; Cpus for Installing the TIM 3 V-IE DNP3 in an S7-300

Uses and properties of the TIM
1.12 Requirements for operation - necessary components and services
TIM DNP3
System Manual, 06/2014, C79000-G8976-C253-03
33
Compact CPU modules
CPU 312C
ab 6ES7 312-5BE03-0AB0
CPU 313C
ab 6ES7 313-5BF03-0AB0
CPU 313C-2 PtP
ab 6ES7 313-6BF03-0AB0
CPU 313C-2DP
ab 6ES7 313-6CF03-0AB0
CPU 314C-2 PtP
ab 6ES7 314-6BG03-0AB0
CPU 314C-2 DP
ab 6ES7 314-6CG03-0AB0
Instead of an S7-300 standard or compact CPU, one of the following C7 control systems can
also be used.
C7 control systems
SIPLUS C7-613
ab 6ES7 613-1CA02-4AE3
SIPLUS C7-635 KEY
ab 6ES7 635-2EC02-4AE3
1.12.2.2
CPUs for installing the TIM 4R-IE DNP3 in an S7-300
Introduction
The TIM 4R-IE DNP3 can be used in an S7-300 as a communications processor (CP). In
principle, all S7-300 standard and compact CPUs can be combined with this TIM. All the
following standard and compact CPUs can be used without restrictions.
Standard CPU modules
CPU 312
ab 6ES7 312-1AE14-0AB0
CPU 314
ab 6ES7 314
-1AG14-0AB0
CPU 315-2 DP
ab 6ES7 315-2AH14-0AB0
CPU 315-2 PN/DP
ab 6ES7 315-2EH14-0AB0
CPU 315T-2 DP
ab 6ES7 315-6TH13-0AB0
CPU 315F-2 DP
ab 6ES7 315-6FF04-0AB0
CPU 315F
-2 PN/DP
ab 6ES7 315
-2FJ14-0AB0
CPU 317-2 DP
ab 6ES7 317-2AJ10-0AB0
CPU 317-2 PN/DP
ab 6ES7 317-2EK14-0AB0
CPU 317T-2 DP
ab 6ES7 317-6TK13-0AB0
CPU 317F-2 DP
ab 6ES7 317-6FF03-0AB0
CPU 317F-2 PN/DP
ab 6ES7 317-2FK14-0AB0
CPU 319F-3 PN/DP
ab 6ES7 318-2FL01-0AB0
CPU 319-3 PN/DP
ab 6ES7 318-3EL01-0AB0