Siemens TIM 4R-IE DNP3 - Access to Subscribers and Working with the Diagnostics Dialogs

Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
TIM DNP3
System Manual, 06/2014, C79000-G8976-C253-03
245
Access using Accessible Nodes
To access the diagnostic data using Accessible Nodes , follow the steps outlined below:
1. Click on the
Accessible Nodes button
or click on the
Project / Accessible Nodes menu.
The
Accessible Nodes dialog opens.
2. In the
Selectable Nodes dialog, select the required subscriber from the list of MPI
addresses by clicking on it with the mouse.
Access using the SINAUT subscriber list of a STEP 7 project
To open the STEP 7 project in the diagnostics and service tool and to access the diagnostic
data using the
SINAUT subscriber list , follow the steps outlined below:
1. Click on the
Open Project button in the toolbar or select the Project / Open menu. The
Open dialog is displayed.
2. Select the STEP 7 project in the
User Projects tab of the Open dialog and click on the OK
button. The project window with the
SINAUT subscriber list of the relevant project opens.
3. If the required project is not displayed in the
Open dialog, click the Browse button. In the
Browse dialog that opens, you can search for other projects and include them in the
project list.
As an alternative, you can open a current project with the
Project / Recently Used menu.
4. Select the subscribers you require for the subsequent diagnostic functions in the
SINAUT
subscriber list
by clicking on them with the mouse.
Figure 7-1 The
SINAUT subscriber list of a sample project