Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
TIM DNP3
250 System Manual, 06/2014, C79000-G8976-C253-03
CPU messages
Description of the functions
The
CPU messages
function is used to archive diagnostic messages entered by a CPU or
TIM module in its diagnostic buffer. Without archiving, messages in the ring buffer of the
CPU or TIM would be successively overwritten once the buffer is full.
The
CPU messages
function registers the PG used for diagnostics with one or more
modules. The modules then transfer all newly generated diagnostic messages to the
registered PG. The diagnostic messages of one or more modules are archive in a common
list on the PG. The archive is designed as a ring buffer. The oldest messages are overwritten
by newly arriving messages once the archive is full.
Figure 7-2
CPU Messages
dialog
The messages for diagnostic events are entered at the bottom of the dialog in the
Archive
tab of the message list.
From the menu of the dialog or using the buttons of the toolbar, various user-specific settings
can be made for message output such as emptying the archive, processing messages, the
view of the message window, the settings for the archive size and saving the PG
connections to the registered modules for the next time the
CP messages
function is called.
To Next Page
Loading...
