Siemens TIM 4R-IE DNP3 - Mirroring Back

The SINAUT Configuration Tool
6.6 TD7onTIM
TIM DNP3
System Manual, 06/2014, C79000-G8976-C253-03
183
Data object
Object type and function
Number of
indexes
occupied
DNP3 object group
[variation]
(S7 data type)
DNP3 level *
Use in stations
type **
Command objects
Cmd01B_S
Command object for send
direction
Send 1 command (1 bit)
1
• 1 [2] (BYTE)
• 2 [2] (BYTE)
• 12 [1] (BYTE)
****
1 ... 5
• S
• S
• M
Cmd01B_R
Command object for receive
direction
Receive 1 command (1 bit)
1
• 1 [2] (BYTE)
• 2 [2] (BYTE)
• 10 [2] (BYTE)
• 12 [1] (BYTE)
1 ... 5
• M
• M
• M
• S
Setpoint and parameter objects
Set01W_S
Setpoint object for send
direction
Send 1 setpoint (16 bits), object
with 3 channels:
• "LocalOperation"
- not used -
• "ReturnedSetpoint"
Function: Mirrored back
setpoint
Channel type: Data receive
1
• 40 [2] (WORD)
***
• 42 [4] (WORD)
***
• 1 ... 5
• 4 ... 5
M
• "SetpointInput"
Function: Setpoint input
Channel type: Setpoint
send
1
• 41 [2] (WORD)
****
• 1 ... 5
Set01W_R
Setpoint object for receive
direction
Receive 1 setpoint (16 bits),
object with 3 channels:
• "Local"
- not used -
• "LocalSetpointInput"
Function: Local setpoint
Channel type: Data send
1
• 40 [2] (WORD)
***
• 42 [4] (WORD)
***
• 1 ... 5
• 4 ... 5
S
• "SetpointOutput"
Function: Setpoint output
Channel type: Setpoint
receive
1
• 41 [2] (WORD) • 1 ... 5