Siemens TIM 4R-IE DNP3 - Page 5

Preface
TIM DNP3
System Manual, 06/2014, C79000-G8976-C253-03
5
Further information on the Internet
You will find further information on the telecontrol products such as the latest information,
manuals, FAQs or software updates on the Internet on the pages of Siemens Automation
Customer Support with the following link:
89373030 (http://support.automation.siemens.com/WW/view/en/89373030)
There select the required information under "Entry type" (for example "Updates", "Manuals",
"FAQs" etc.).
SIMATIC NET glossary
Explanations of the specialist terms used in this documentation can be found in the SIMATIC
NET glossary.
You will find the SIMATIC NET glossary here:
● SIMATIC NET Manual Collection
The DVD ships with certain SIMATIC NET products.
● On the Internet under the following entry ID:
50305045 (http://support.automation.siemens.com/WW/view/en/50305045)
License conditions
Note
Open source software
Read the license conditions for open source software carefully before using the product.
You will find license conditions in the following documents on the supplied data medium:
● DOC_OSS-S7CMCP_74.pdf
● DOC_OSS-TIM-DNP3_76.pdf
Training, Service & Support
You will find information on Training, Service & Support in the multilanguage document
"DC_support_99.pdf" on the "SIMATIC NET Manual Collection" DVD that ships with the
products.
Trademarks
The following and possibly other names not identified by the registered trademark sign
®
are
registered trademarks of Siemens AG:
TIM 3V-IE DNP3, TIM 4R-IE DNP3, SINAUT, SCALANCE, MODEM MD720, Modem MD2 /
MD3 / MD4, LTOP