Table of contents Installation
5 - 2
© Siemens VDO Automotive AG Edition 07/2007
TD00.1381.00 132 102
Table of Contents
Chapter 5 Installation
5.1 General instructions ..................................................... 5-3
5.1.1 Terminology definitions ...................................... 5-3
5.1.2 Personnel prerequisites ....................................... 5-4
5.1.3 Technical prerequisites ........................................ 5-4
5.1.4 Other instructions ............................................... 5-5
5.1.5 Handling the tachograph cards ........................... 5-6
5.2 Instructions on installing the DTCO 1381 ..................... 5-7
5.2.1 General installation instructions .......................... 5-8
5.2.2 Working on the electrical onboard power supply . 5-9
5.2.3 Laying and establishing connecting cables .......... 5-9
5.2.4 Lead sealing the DTCO 1381 components .......... 5-10
Preparing sealing tools ...................................... 5-11
5.3 Criteria for the installation site ................................... 5-12
5.3.1 Legal requirements ........................................... 5-12
5.3.2 Manufacturer’s specifications ............................ 5-12
5.3.3 Manufacturer’s recommendations ..................... 5-14
5.4 Tools and installation accessories .............................. 5-15
5.4.1 Tools ................................................................ 5-15
5.4.2 Installation accessories ..................................... 5-16
5.5 Performing the installation ........................................ 5-17
5.5.1 Schematic diagram ........................................... 5-17
5.5.2 Checking the condition of the DTCO 1381
upon delivery ................................................... 5-18
Checking the identification and sealing ............. 5-18
Checking the buffer battery .............................. 5-19
5.5.3 Checking the place of installation and the
cable connections ............................................. 5-20
5.5.4 Installing the KITAS 2171 .................................. 5-22
5.5.5 Sealing the KITAS 2171 to the transmission ....... 5-23
With sealing wire .............................................. 5-23
With KITAS hexagonal seal ................................ 5-24
5.5.6 Preparing the radio compartment ..................... 5-25
Assembling installation frame in the radio
compartment ................................................... 5-25
Checking the radio compartment with the
installation frame ............................................. 5-26
Preparing the DTCO 1381 for mounting into
the radio compartment ..................................... 5-26
5.5.7 Connecting the DTCO 1381 to the vehicle’s
onboard power supply ...................................... 5-27
Connection plug B ............................................ 5-28
Connection plugs C and D ................................. 5-29
Connection plug A ............................................ 5-30
5.5.8 Mounting the DTCO 1381 ................................. 5-31
Removing the DTCO 1381 ................................. 5-32
To Next Page
Loading...
