Siemens VDO DTCO 1381 - Data Saved in the Data Memory

Service only
Data handling 4.2 The flow of data and memory behaviour
Edition 07/2007 Technical Description DTCO 1381 4 - 7
TD00.1381.00 132 102
4.2.4 Data saved in the data memory
The DTCO 1381 registers and saves the following legally stipulated
data:
Identification data of the
DTCO 1381
•Name of manufacturer
• Address of manufacturer
• Model / part number
•Year of manufacture
• Serial number
•Approval number
•Software version
• Date of software installation
Identification data of the
KITAS 2171
• Serial number
•Approval number
• Date of initial pairing
Security data •Cryptographical key
Insertion and withdrawal of
driver cards / workshop cards
The following data will be registered and saved each time a driver
card or workshop card is inserted/withdrawn:
• Last and first names of the cardholder (saved on the card)
• Card number, issuing member state, validity
• Card in slot 1 (driver) or card in slot 2 (co-driver)
• Date and time card inserted
• Odometer reading when card inserted
• Date and time when card withdrawn
• Odometer reading when card withdrawn
• Information about the last vehicle
– Registration number
– Country of registration
– Date and time when card withdrawn
• Recognition of whether manual entries were made when card
was inserted