Siemens VDO DTCO 1381 - Pin Assignment

Service only
2.1 DTCO 1381 Technical data
2 - 4
© Siemens VDO Automotive AG Edition 07/2007
TD00.1381.00 132 102
2.1.2 Pin assignment
Fig. 2 - 4: Pin assignment DTCO 1381
*Option
Connection
Plug A A1 Term. 30 Permanent voltage
A2 Term. 58d Illumination* (control input)
A3 Term. 15 Ignition
A4 CAN_H
A5 Term. 31a Minus
A6 Term. 31 Ground
A7 CAN_GND
A8 CAN_L
Plug B B1 v-sensor supply (+)
B2 v-sensor supply (–)
B3 v-signal (real time)
B4 I/O data signal
B5 ---
B6 v-pulse output*
B7 v-pulse output
B8 4 pulses/m signal output
Plug C C1 ---
C2 n-sensor supply (–)*
C3 Term. W n-sensor signal input*
C4 ---
C5 CAN_H*
C6 CAN_GND*
C7 CAN_L*
C8 CAN_RES*
Plug D D1 Additional stylus, input 1*
D2 Additional stylus, input 2*
D3 ---
D4 TCO warning output
D5 ---
D6 v-pulse output*
D7 K-Line diagnosis interface*
D8 Info interface
A
B
C
D