Siemens VDO DTCO 1381 - 7.3 Performing the preprogramming

Service only
Preprogramming 7.3 Performing the preprogramming
Edition 07/2007 Technical Description DTCO 1381 7 - 5
TD00.1381.00 132 102
7.3 Performing the preprogramming
Definition Preprogramming of all known or operationally necessary and legally
required parameters.
7.3.1 Legally stipulated parameters
The following parameters are legally stipulated and must be prepro-
grammed:
• Vehicle identification number
• Vehicle registration number
• Country of registration
• Characteristic coefficient (w-value)
• Recording equipment constant (k-value)*
• Effective wheel circumference
•Tire size
• Legally permitted maximum speed
•Odometer reading
•UTC time
•Calibration date*
* The DTCO 1381 sets this data automatically.
Attention!
During preprogramming, be absolutely certain that the DTCO 1381
is operated in the specified voltage range!