Siemens VDO DTCO 1381 - Checking the Radio Compartment with the Installation Frame; Preparing the DTCO 1381 for Mounting into the Radio Compartment

Service only
5.5 Performing the installation Installation
5 - 26
© Siemens VDO Automotive AG Edition 07/2007
TD00.1381.00 132 102
Checking the radio compartment with the installation frame
Fig. 5 - 13: Checking the radio compartment with the installation frame
1. Checking the radio compartment with the installation frame:
• The required installation frame (1) installed and fixed in
place.
• Additional support (2) at the rear of the radio compartment.
• Clearance for claw hold (3) of the DTCO 1381.
• All connection cables (4) are laid through the installation
frame.
Preparing the DTCO 1381 for mounting into the radio compartment
Fig. 5 - 14: Preparing the DTCO 1381 for mounting into the radio com-
partment
1. Check whether the spacer (1) is necessary for support at the
rear of the compartment.
2. If necessary, screw the spacer to the rear of the housing of the
DTCO 1381.
3
3
3
1
2
4
1