Siemens VDO DTCO 1381 - 7.2 Testing equipment

Service only
7.2 Testing equipment Preprogramming
7 - 4
© Siemens VDO Automotive AG Edition 07/2007
TD00.1381.00 132 102
7.2 Testing equipment
The preprogramming is performed with a appropriate test
equipment; for example, the Siemens VDO SDS test devices
MTC 1602.04 or ATC 1601.26.
Fig. 7 - 1: Siemens VDO SDS test devices MTC 1602.04 / ATC 1601.26
For the preprogramming with the Siemens VDO SDS test devices the
following testing equipment must be available:
(1) BTC test software, version DTCO 1381 or higher
(2) Mount (MTC/ATC) with firmware version DTCO 1381
(3) Programming cable
(4) Diagnosis cable DTCO 1381
DTCO 1381 testing and programming software
(without figure)
2
4
3
1