Technical data 2.2 KITAS 2171
Edition 07/2007 Technical Description DTCO 1381 2 - 17
TD00.1381.00 132 102
2.2.4 KITAS 2171 Technical data
Integrated version Standard version
2171.20 xx 2171.50 xx 2171.0x
Operational voltage U
E
6,5 ... 9 V DC 6,5 ... 9 V DC
Power consumption max. 15 mA max. 15 mA
Operating temperature Range A: -30 ... +135 °C
Range B: -30 ... +145 °C
- 30 ... +125 °C
Storage temperature Range A: -40 ... +140 °C
Range B: -40 ... +150 °C
- 40 ... +140 °C
Pulses / revolution ----- 8
Pulse ratio ----- 30 ... 70 % - 70 ... 30 %
Connection ungrounded ungrounded
Signal form (pin 3) Rectangular Rectangular
Frequency range 1 Hz ... 2000 Hz 800 Hz 1 Hz ... 1000 Hz
Output signal (pin 3) Real time signal
U
Lmax
= 0,8 V (@I=250 µA)
U
Hmin
= U
E
-1,5 V (@I=150 µA)
Real time signal
U
Lmax
= 0,8 V (@I=250 µA)
U
Hmin
= U
E
-1,5 V (@I=150 µA)
Noise voltage protection DIN 40 839 T1 + T3 over DTCO DIN 40 839 T1 + T3 over DTCO
Irradiation immunity DIN 40 839 T4 (100 V/m) DIN 40 839 T4 (100 V/m)
Outputs (short-circuit protected) 28 V, 1 min. 28 V, 1 min.
Output signal (pin 4) bi-directional bi-directional
Protection type EN 60529-IP67 + IP69K EN 60529-IP67 + IP69K
Vibrostability 30 g 10 g
Shock stability 1000 g 50 g 11 ms
Pulse wheel material DC04 (= St 4) ---
Pulse wheel thickness 2 mm ---
Tooth width min. 7 mm ---
Tooth length 16 mm ---
Tooth gap min. 1,5 x tooth width 1,5 ... 2 x tooth width ---
Cannot be used with external mag-
netic field
> 2 mT --- ---
Connection: pulse generator on
pulse generator line
Plug connection according to
ISO 15170-B1-4.1-Ag/K3
Plug connection according to
ISO 15170-B1-4.1-Ag/K3
Connection: pulse generator on
vehicle transmission
via M18 x 1,5 thread via M22 x 1,5 thread or
7/8" 18 UNS 2B
Tightening torque (wrench size) max. 50 Nm (27) max. 50 Nm (27)
Weight approx. 100 ... 180 g,
depending on "L"
approx. 120 ... 165 g,
depending on "L"
approx. 135 ... 150 g
To Next Page
Loading...
