Installation 5.5 Performing the installation
Edition 07/2007 Technical Description DTCO 1381 5 - 27
TD00.1381.00 132 102
5.5.7 Connecting the DTCO 1381 to the vehicle’s onboard power supply
Follow the following procedure in the proper order to connect the
DTCO 1381 to the vehicle’s onboard power supply:
1. Connection plug B (motion sensor KITAS 2171, v-outputs).
2. Connection plugs C (CAN bus, n-system*) and D (info interface,
additional functions*).
3. Connection plug A (power supply, CAN bus).
4. If necessary, mount and seal the plug cover.
*Option
To prevent unauthorised handling you can also mount and seal the
plug cover which is available as an accessory.
Installation and sealing of the plug cover is, however, not required
by law.
To Next Page
Loading...
