Siemens VDO DTCO 1381 - Handling the Printouts; Operating the ADR Variant; Printing or Display of Data

Service only
3.1 General instructions Operating the DTCO 1381
3 - 4
© Siemens VDO Automotive AG Edition 07/2007
TD00.1381.00 132 102
3.1.2 Operating the ADR variant
In the ADR variant, the insertion or withdrawal of a tachograph card
and the printing or display of data is possible only when the ignition
is turned on.
3.1.3 Printing or display of data
Before activation, no calibration parameters are given when printing
or displaying the Technical data (printout vehicle "Technical data" or
display vehicle "Technical data).
If, at the time of request, no data for printing or display are
available, e.g. the DTCO 1381 has not yet been activated, printing or
display will not be started.
3.1.4 Handling the printouts
Retain the printouts where they will not be damaged by strong light,
sunlight, moisture, or heat (making them illegible).
Please obey your country's legal regulations surrounding the
printouts, especially the obligation to preserve the printouts!