Siemens VDO DTCO 1381 - Vehicle (Data Memory)

Service only
Events and faults 13.3 Printing the event and fault memory
Edition 07/2007 Technical Description DTCO 1381 13 - 9
TD00.1381.00 132 102
13.3.2 Vehicle (data memory)
Purpose In this menu you can print the events and faults saved in the data
memory.
Step / menu display Explanation / meaning
1 Starting from the standard display ...
– press repetitively the button until the display "call main menu"
appears and
– acknowledge with the button .
or
–Press the button .
2 – Select "printout vehicle" with the button or and
– acknowledge with the button .
3 – Select "vehicle event" with the button or and
– acknowledge with the button .
4 The DTCO 1381 starts the selected printout and displays this for
approximately three seconds.
DBMMáNBJOáNFOV
QSJOUPVU
roá7FIJDMF ááá
roáWFIJDMF
YroáFWFOU ááá
QSJOUPVU
TUBSUFE
The additional pictograms shown in the calibration mode will not be
printed.