Siemens VDO DTCO 1381 - Messages; Selection Menu

Service only
3.2 Display variations Operating the DTCO 1381
3 - 8
© Siemens VDO Automotive AG Edition 07/2007
TD00.1381.00 132 102
3.2.5 Selection menu
3.2.6 Messages
Data displayed when vehicle is standing still
When the vehicle is not moving and driver card 1 is inserted, you can
display the current times of driver 1 by pressing the button :
(1) Driving time since a break of 45 minutes
(2) Sum of the valid breaks in partial breaks of at least 15 minutes
(3) Driving time of the double week
(4) Duration of the set activity
If you press button once again while driver card 2 is inserted, the times
of driver 2 will appear.
Remark
If the driver card is missing, data which is assigned to the respective card
slot will appear.
Menu display Explanation / meaning
dI iI
dxI bI
1 2
3
4
dI iI
dxI aI
Menu display Explanation / meaning
Possible functions or variations which can be selected by you will be
shown by blinking in the 2nd line of the menu display.
• Use the buttons or to select the desired function or variation step
by step and acknowledge with the button.
EJTQMBZ
rl WFIJDMF áá
EJTQMBZ
jl ESJWFS  áá
Menu display Explanation / meaning
Regardless of which display currently appears or whether the vehicle is
moving or stationary, messages will be displayed with priority.
(1) Pictogram of the cause
(2) Text
(3) Memory code (position in error memory)
➥ Detailed information, see chapter 13 "Events and faults".
YráUJNFáGBVMU
ááááááááááááááá
12 3