Siemens VDO DTCO 1381 - Memory Behaviour During Events or Faults

Service only
14.4 Explanation of printout examples Appendix
14 - 26
© Siemens VDO Automotive AG Edition 07/2007
TD00.1381.00 132 102
Data record of the event or fault
Line 1:
• Pictogram of the event or fault.
• Date and beginning.
Line 2:
• Events subject to security breach are broken down with an additional code, see
chapter 14.5 "Memory behaviour during events or faults", page 14-30.
• Duration of the event or fault.
Line 3:
• Authorizing member state and registration number of the vehicle in which the events
or faults appeared.
List of the five most recent saved or still active events/disturbances in the DTCO 1381
List of all recorded or continuing events of the DTCO 1381
List of all recorded or continuing faults of the DTCO 1381
Data record of the event or fault
Line 1:
• Pictogram of the event or fault.
• Coding data record purpose, see chapter 14.5 "Memory behaviour during events or
faults", page 14-30.
• Date and beginning.
Line 2:
• Events subject to security breach are broken down with an additional code, see
chapter 14.5 "Memory behaviour during events or faults", page 14-30.
• Number of similar events on this day, see chapter 14.5 "Memory behaviour during
events or faults", page 14-30.
• Duration of the event or fault.
Line 3:
• Identification of the driver card(s) (maximum of four entries) that was inserted at the
beginning or at the end of the event or fault.
•"j" appears when no driver card is inserted.
Pos. / block Data block specification / explanation
12c
13
13a
13b
13c